The Resource Thermal process modeling : proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation June 16-18, 2014 Gaylord Palms Resort & Convention Center Orlando, FL USA, edited by B. Lynn Ferguson [and three others], (electronic resource/)

Thermal process modeling : proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation June 16-18, 2014 Gaylord Palms Resort & Convention Center Orlando, FL USA, edited by B. Lynn Ferguson [and three others], (electronic resource/)

Label
Thermal process modeling : proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation June 16-18, 2014 Gaylord Palms Resort & Convention Center Orlando, FL USA
Title
Thermal process modeling
Title remainder
proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation June 16-18, 2014 Gaylord Palms Resort & Convention Center Orlando, FL USA
Statement of responsibility
edited by B. Lynn Ferguson [and three others]
Creator
Contributor
Editor
Subject
Genre
Language
eng
Cataloging source
E7B
Dewey number
672.3
Illustrations
  • illustrations
  • charts
Index
index present
LC call number
TN752.T54
LC item number
.I584 2014eb
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
Label
Thermal process modeling : proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation June 16-18, 2014 Gaylord Palms Resort & Convention Center Orlando, FL USA, edited by B. Lynn Ferguson [and three others], (electronic resource/)
Link
http://massasoit.idm.oclc.org/login?url=https://search.ebscohost.com/login.aspx?direct=true&authtype=cookie%2Cip%2Ccpid&custid=massas&scope=site&db=nlebk&AN=879142
Instantiates
Publication
Copyright
Bibliography note
Includes bibliographical references at the end of each chapters and index
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Title Page; Copyright; Preface; ICTPMCS 2014 Organizing Committee; Contents; Modeling Heat Treatment for Characterizing Distortion, Residual Stress, Loading Response and Fracture in a Vacuum Carburized and Gas Quenched Steel Coupon; Measurement and Prediction of Residual Stresses in Heat Treated Large Forgings; Finite Element Modeling of Immersion Route Effect on Macroscopic Distortion during Quenching of Long Steel Components; FE-I?a?Introducing Microscale Effects into FEM Simulation of Cold Forming
  • Computer Simulation and Experimental Validation of Low Pressure Sand Casting Process of Magnesium Alloy V6 Engine BlockFEM Comparative Between Two Roller Sizes for Hot Shape Rolling of Reinforcement Bars Fabrication; Thermo-mechanical Simulation of Laser Beam Assisted Clinching for High-Strength Steel; Modeling of Aging Hardening in Aluminum Alloys; Modeling Heat Treatment of 7075 Aluminum Components; Finite Element Analysis of the Tool Load during Manufacturing of a Flange in a Semisolid State
  • Thermal Modeling and Simulation of a Pico-Satellite using Finite Element MethodModeling Induction Heat Distribution in Carbon Fiber Reinforced Thermoplastics; Modeling of Coil Design for Induction Hardening in an Automotive Spindle Axle; Stress Generation in an Axle Shaft during Induction Hardening; Structural Materials Data Demonstration Projecta?Resource for Thermal Process Modeling; Computer Modeling of Mechanical Properties and Microstructure of Quenched Steel Specimen; Modeling of Mechanical Properties in Castings
  • Integrating M2M Services for Data Base Capture and Modeling Into Your ProcessMathematical Modelling of the Vacuum Carburizing Process; Understanding Atmosphere in Carburizing Applications Using Simulation and Real-Time Carbon Diffusion; Temperature-Related Advances in Liquid Nitrocarburizing Technology ; Improvement on Temperature Uniformity in an Industrial Tip-up Heat Treating Furnace; Finite Element Simulations of Geometric Distortions in Ferritic Nitrocarburized SAE 1010 Plain Carbon Steel; Simulation of Distortion during Quenching Process
  • Effect of Hardenability and Press Quenching on Distortion of Crown WheelsNumerical Study of Residual Stresses and Distortion in Quenched Large Complicated Thin-Wall A357 Aluminum Alloy Workpieces; An ABAQUS Implementation of Finite Element Analysis of Steady State Manufacturing Process in an Eulerian Frame; Cellular Automata Model Of Low Carbon Steel Recrystallization Using A Refined Dislocation Density Calculation; Numerical Simulation of Phase Transformation during the Hot Stamping Process; Residual Stresses in Martensite after Multiple Heating Events
Control code
ocn891400346
Dimensions
unknown
Extent
1 online resource (access may be restricted)
Form of item
online
Governing access note
Access restricted to subscribing institution
Media category
computer
Media MARC source
rdamedia
Media type code
c
Specific material designation
remote
Label
Thermal process modeling : proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation June 16-18, 2014 Gaylord Palms Resort & Convention Center Orlando, FL USA, edited by B. Lynn Ferguson [and three others], (electronic resource/)
Link
http://massasoit.idm.oclc.org/login?url=https://search.ebscohost.com/login.aspx?direct=true&authtype=cookie%2Cip%2Ccpid&custid=massas&scope=site&db=nlebk&AN=879142
Publication
Copyright
Bibliography note
Includes bibliographical references at the end of each chapters and index
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Title Page; Copyright; Preface; ICTPMCS 2014 Organizing Committee; Contents; Modeling Heat Treatment for Characterizing Distortion, Residual Stress, Loading Response and Fracture in a Vacuum Carburized and Gas Quenched Steel Coupon; Measurement and Prediction of Residual Stresses in Heat Treated Large Forgings; Finite Element Modeling of Immersion Route Effect on Macroscopic Distortion during Quenching of Long Steel Components; FE-I?a?Introducing Microscale Effects into FEM Simulation of Cold Forming
  • Computer Simulation and Experimental Validation of Low Pressure Sand Casting Process of Magnesium Alloy V6 Engine BlockFEM Comparative Between Two Roller Sizes for Hot Shape Rolling of Reinforcement Bars Fabrication; Thermo-mechanical Simulation of Laser Beam Assisted Clinching for High-Strength Steel; Modeling of Aging Hardening in Aluminum Alloys; Modeling Heat Treatment of 7075 Aluminum Components; Finite Element Analysis of the Tool Load during Manufacturing of a Flange in a Semisolid State
  • Thermal Modeling and Simulation of a Pico-Satellite using Finite Element MethodModeling Induction Heat Distribution in Carbon Fiber Reinforced Thermoplastics; Modeling of Coil Design for Induction Hardening in an Automotive Spindle Axle; Stress Generation in an Axle Shaft during Induction Hardening; Structural Materials Data Demonstration Projecta?Resource for Thermal Process Modeling; Computer Modeling of Mechanical Properties and Microstructure of Quenched Steel Specimen; Modeling of Mechanical Properties in Castings
  • Integrating M2M Services for Data Base Capture and Modeling Into Your ProcessMathematical Modelling of the Vacuum Carburizing Process; Understanding Atmosphere in Carburizing Applications Using Simulation and Real-Time Carbon Diffusion; Temperature-Related Advances in Liquid Nitrocarburizing Technology ; Improvement on Temperature Uniformity in an Industrial Tip-up Heat Treating Furnace; Finite Element Simulations of Geometric Distortions in Ferritic Nitrocarburized SAE 1010 Plain Carbon Steel; Simulation of Distortion during Quenching Process
  • Effect of Hardenability and Press Quenching on Distortion of Crown WheelsNumerical Study of Residual Stresses and Distortion in Quenched Large Complicated Thin-Wall A357 Aluminum Alloy Workpieces; An ABAQUS Implementation of Finite Element Analysis of Steady State Manufacturing Process in an Eulerian Frame; Cellular Automata Model Of Low Carbon Steel Recrystallization Using A Refined Dislocation Density Calculation; Numerical Simulation of Phase Transformation during the Hot Stamping Process; Residual Stresses in Martensite after Multiple Heating Events
Control code
ocn891400346
Dimensions
unknown
Extent
1 online resource (access may be restricted)
Form of item
online
Governing access note
Access restricted to subscribing institution
Media category
computer
Media MARC source
rdamedia
Media type code
c
Specific material designation
remote

Library Locations

    • Nease Library - Eastern Nazarene College Borrow it
      23 East Elm Ave. , Quincy, MA, 02170, US
      42.271089 -71.012428
    • Quincy College Library Borrow it
      1250 Hancock St. 3rd Fl Rm#347, Quincy, MA, 02169, US
      42.2513682 -70.9962875
Processing Feedback ...